Daily inspection and maintenance of laser engraving machine

Daily equipment inspection and maintenance

1. Check whether the equipment is clean and overall lubricated;

2. Check whether there are sundries on and around the equipment, and keep the equipment and surrounding environment clean;

3. The current of the equipment cannot easily exceed 20A;

4. Whether mobile phones and strong magnetic objects are close to the galvanometer;

5. Pay attention to whether there is abnormal noise during the operation of the equipment;

6. Do not touch the lens with your hands or other objects;

7. Strictly abide by the startup and shutdown procedures of the equipment;

8. If the computer crashes or the software does not respond, turn off the galvanometer switch immediately;

9. Check whether the equipment circuit is well grounded;

10. Check for damaged or missing parts.