How to maintain and maintain the laser cutting machine in the high temperature in summer

water cooling

In high temperature weather, the deterioration rate of cooling water will also be accelerated. It is recommended that users of laser cutting machine use regular distilled water or pure water, and clean the scale regularly, so as not to cause the scale attached to the laser and the pipeline to affect the laser power; pay attention to the temperature of the cooling water not to be different from the air temperature It is too large. With the increasing temperature in summer, the working pressure of the cooling system of the laser cutting machine increases sharply. It is recommended to check and maintain the internal pressure of the cooling machine before the high temperature comes, and adjust it in time to adapt to the high temperature weather.

Lubrication

The guide rails should be cleaned frequently to remove dust and other sundries to ensure the normal operation of the laser equipment. The racks should be wiped frequently and lubricated. The time should be adjusted. Compared with the spring and autumn seasons, the time should be shortened by 0.5-1 times, and the observation should be maintained. Oil condition. For machinery working in high temperature areas, the viscosity level of the oil should be appropriately increased, and the temperature of the fat oil will change easily and add oil properly to ensure lubrication without debris. Carefully check the straightness of the cutting table and the track of the laser cutting machine and the verticality of the machine, and maintain and debug it in time if it is found to be abnormal. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently to keep the machine in the best condition at all times. The machine can move better during operation, and cut more accurately. Product quality will be higher.