Precautions for the use of fiber optic machine

The fiber cutting machine uses a high-power density laser beam emitted by a laser generator to irradiate the workpiece material to increase the temperature of the workpiece to form a hole, and finally achieve the cutting effect.

Mainly used for metal equipment such as steel and aluminum alloy.

Precautions:

1. Since the power of the fiber cutting machine is relatively large, outsiders must be prohibited from entering when the machine is working, and the eyes must be protected.

2. The high-density laser beam is very harmful to the eyes, so be sure not to look directly at the laser beam when working.

3. After the computer is turned on, use the relevant commands to enter the desktop.

4. When the protective cover is not installed, please do not use the machine;

5. When using gas cylinders, avoid crushing the welding wires to prevent leakage.

6. Maintenance must also be carried out in accordance with regulations and procedures. It runs for 40 hours a week for maintenance, and 1,000 hours for maintenance once every six months.

7. It is forbidden to explode gas cylinders in the sun or close to heat sources.

8. When opening the bottle valve, the operator must stand on the side of the bottle mouth

The high-power fiber laser cutting machine can help us solve some materials that cannot be cut by ordinary machines, and it is aimed at a wider range of audiences.