The fiberglass cloth automatic cutting machine does not need to make a drawing board. What kind of style you want to cut, you just need to import the data into the system. This process saves a lot of time, does not require manpower, and saves a lot of boards. type of cost.The built-in super nesting

The nozzle is used to spray auxiliary gas to the cutting area. Generally, a coaxial (air flow and optical axis coaxial line) nozzle is used on a laser cutting machine. About it, the universe is big and it will affect the cutting quality if it is not done well.1. The shape of the nozzleThere are many

There are two situations where 80w, 100w, 130w, and 150w laser tubes produce high-pressure sparks. In both types of sparks, you can hear obvious firecrackers. Failure phenomena: there are two phenomena: sparks inside the laser tube and sparks outside the tube. During observation, the sparking inside

CD, VCD laser head is a vulnerable parts, the core component of the vulnerable parts is the laser tube, many maintenance in the laser tube after damage to spend dozens of yuan directly replace the laser head, which is not cost-effective for consumers, in fact, as long as the cost of replacing the la

Laser tube, full name: glass sealed-off CO2 laser. Because this laser is encapsulated by a glass tube, it is commonly called a laser tube.Working principle: High-voltage discharge excites high-concentration CO2 gas to produce a laser with a wavelength of 10.6um.It is mainly composed of hard glass, r