The nozzle is used to spray auxiliary gas to the cutting area. Generally, a coaxial (air flow and optical axis coaxial line) nozzle is used on a laser cutting machine. About it, the universe is big and it will affect the cutting quality if it is not done well.1. The shape of the nozzleThere are many

There are two situations where 80w, 100w, 130w, and 150w laser tubes produce high-pressure sparks. In both types of sparks, you can hear obvious firecrackers. Failure phenomena: there are two phenomena: sparks inside the laser tube and sparks outside the tube. During observation, the sparking inside

Laser tube, full name: glass sealed-off CO2 laser. Because this laser is encapsulated by a glass tube, it is commonly called a laser tube.Working principle: High-voltage discharge excites high-concentration CO2 gas to produce a laser with a wavelength of 10.6um.It is mainly composed of hard glass, r

Leather is the non-perishable animal skin obtained by physical or chemical processing.Because leather surface has natural grain grain and burnish, feel comfortable. Clothing made of leather will be immediately loved by consumers.The broad development of the garment industry, but also driven the Maic

Automatic cloth cutting machine adopts the third generation of intelligent control system, full automatic processing, automatic material loading and unloading, intelligent layout and automatic cutting can be completed one by one.Compared with traditional handicrafts, automatic cloth cutting machine